KELSEI'S CREATIONS can not and will NOT stand behind any of our molds bought second hand or in a garage sale. All our molds have a 30 Day Guarantee on them sold by us, ONLY!
All the soap molds have been personally tested by me. I use the soap molds with the CP process and also the Oven Process Soaping. ALL our divider soap molds have the same size bars, all the bars are 2 1/8 In. x 3 1/8 In. I never say fill any of the molds FULL. Because you need to leave room to get your fingers or a pair of pliers on the dividers to pull them out of the molds. EACH mold that are the Dividers Molds are 2 In. deep. All the bars out of the molds will weigh from 2 to almost 6 oz. Depending on how much oils you use to make the batch of soap. Most of the time, all orders are shipped within a few days unless it is busy time of the year, Holidays. Then please allow 5-7 business days to ship. All the molds are made by Max, my husband. We try to keep all in stock, but sometimes we do run out, but will have more in a few days.
CAUTION: We, Kelsei's Creations, ARE NOT Responsible for any injuries resulting from improper use or mishandling of the molds. WE, Kelsei's Creations, DO NOT recommend using these molds in the oven, although, I DO use them in the oven and some of our customers use them in the oven with wonderful luck, but WE CAN NOT guarantee them! With proper care and caution you should have NO problems. PLEASE email me if you have any questions. We WILL NOT and CAN NOT guarantee them in the oven process, as all ovens are different, and everyone does their's differently.
ALL the liners for the soap molds on this page can only be purchased for the molds if you bought them from us October 2007 through now. The mold will have on the side the date, so please check before you order a liner. Otherwise the liners will NOT fit your mold or molds.
Thanks
Kelsei's Creations
Patent Pending
VICKI'S 3 LOG SOAP MOLD
Price
$60.00
A customer, Vicki, asked us to make this 3 Log Soap Mold™and she loved it so much and told others about it, so we put it out on the market for all to see and purchase. She wanted it made like what she called "drawer liners". I think you will love the mold also. The liner is in the picture with the mold, BUT the liner is sold seperatly, below. You do not have to have the liner in order to use the mold, as with all our molds, but just makes it easier to get the soaps out, customers tell us.
Vicki gave me permission to name this mold after her. Vicki, a BIG thank you for helping us get this mold right for you and a BIG thank you for telling your friends about it.
Measurements For Vicki's 3 Log Soap Mold OUTSIDE MEASUREMENTS: 20 In. Long 14 1/8 In. Wide
INSIDE MEASUREMENTS: 18 1/2 In. Long 14 3/8 In. Wide
EACH SOAP LOG SIZE THAT COMES OUT OF THE MOLD 18 1/2 In. Long 3 3/4 In. Wide Logs are 2 1/2 In. Tall/Deep
LINER FOR 3 LOG SOAP MOLD
Price
$29.00
BEGINNER SOAP MAKING KIT WITH 9 BAR ALL PLASTIC SOAP MOLD
Regular Price
$66.95
SALE PRICE
$60.95
I have put together a soap making kit for the beginner soapmaker. It has the MINI ALL PLASTIC soap mold, palm oil, coconut oil and olive oil in it to make 2 pounds of soap. It has the fragrance oil to scent the 2 pounds of soap in it.
There is NO lye in the kit, as I can not ship lye, but if you are having a hard time finding it, email me and I will give you a few places that I know that sell the lye on the internet. There is also instructions on how to make the soap with this kit. This is a very good way to start out with soap making and you also have your mold that has the dividers in it that Max makes.
There is NO liner in this 9 bar mold, if you want a liner for it, order it below.
ALL PLASTIC SOAP MOLDS™
LOG SOAP MOLD
Regular Price
$54.95SALE PRICE
$45.95
The mold will hold 2 1/2 to 2 3/4 pounds of soap. The sides slide in groves and held in place with long screws. You DO NOT need to line this mold with a plastic bag or freezer paper, just pour your soap into the mold, no leaking, no sticking of the soap. Sides let down for easy removal of the log of soap, soap will not be stuck on bottom and if is stuck a little, all you need to do is tap on the bottom and the log of soap slides right off.
INSIDE MEASUREMENTS: 12 inches long, 3 1/4 inches wide and 2 1/4 inches deep.
OUTSIDE MEASUREMENTS: 15 inches long, 4 1/4 inches wide and 3 1/2 inches high.
Patent Pending
MINI ALL PLASTIC SOAP MOLD
Regular Price
$59.95SALE PRICE
$49.95
People asked us to make a Mini™ Our All Plastic Soap Mold. I have personally tested this mold and it works wonderfully. It makes perfect 2 1/8 X 3 1/8 bars every time. The mold will hold up to 2 1/2 Pounds of soap and it makes 9 bars. Each bar comes out perfect. Instructions come with the mold and need to ask anything I am just a email away or a phone call away. This mold I also use for a lot of my "test" batches, it makes just the right amount to test.
LINER FOR MINI 9 BAR SOAP MOLD
Regular Price
$16.00
Patent Pending
12 BAR SOAP MOLD
Price
$60.00
People asked us to make a 12 Bar Soap Mold™I have personally tested this mold and it works wonderfully. It makes perfect 2 1/8 X 3 1/8 bars. Each bar comes out perfect. Instructions come with the mold and if you need to ask anything I am just a email away or a phone call away. This mold was made for a customer and we liked it so much we decided to put it out on the market. I think you will love the mold also. It is great for those orders that want a dozen soaps of one scent.
LINER FOR 12 BAR SOAP MOLD
Price
$22.00
Patent Pending
ALL PLASTIC 18 BAR SOAP MOLD
Regular Price
$87.95SALE PRICE
$75.95
This soap mold is a 18 Bar Mold. The size of the bars are the same as ALL the molds, 2 1/8 x 3 1/8 bars. This mold will hold up to 8 pounds of soap, BUT I DO NOT suggest filling it full of soap, because you need to leave room to get the pliers on the dividers to them out.
LINER FOR SMALL 18 BAR SOAP MOLD
Regular Price
$26.00
The liner for the Small (18 Bar Soap Mold) is made of Polyurethane. It fits on the bottom of the mold and then you pour you soap into the mold, put the dividers in and then when you unmold your soaps just peel the liner off the soaps and the soaps WILL NOT stick at all to the mold. Makes for a much easier way of unmolding the soaps. This liner is very strong and will last you a long time.
SALE PRICE
$108.95
This mold is our NEWEST mold, which is all plastic and the dividers are placed inside the mold along slits that holds the dividers in place. The sides are all plastic and they set inside the bottom in grooves and you mash it in good or use a hammer to put it into the bottom. This mold will make 30 bars of soap, that are app. 2 1/8 inches wide, 3 1/8 inches long and the mold is 2 inches deep. It will hold 4-10 pounds of soap. The OUTSIDE measurments of this molds are 16 in. wide and 20 in. long, made to fit in my oven! Max made this mold for me so I could make larger batches of soap and put the mold in the oven, so this is the size that will fit in my Jen Air oven. If you want to know more about this mold please email me and I will get back with you with more details on the mold.
.jpg)
The liner for the 30 Bar Soap Mold is made of Polyurethane. It fits on the bottom of the mold and then you pour you soap into the mold, put the dividers in and then when you unmold your soaps just peel the liner off the soaps and the soaps WILL NOT stick at all to the mold. Makes for a much easier way of unmolding the soaps. This liner is very strong and will last you a long time.
SALE PRICE
$135.95
This mold is our large all plastic mold, and the dividers are placed inside the mold along slits that holds the dividers in place. The sides are all plastic and they set inside the bottom in grooves and you hammer or push in good along the bottom. This mold will make 42 bars of soap, that are app. 2 1/8 inches wide, 3 1/8 inches long and the mold is 2 1/8 inches deep. It will hold 6-18 pounds of soap. The mold measures 24 inches long and it is 18 inches wide. If you want to know more about this mold please email me and I will get back with you with details on the mold. We think it is SUPER!!! And hope you all will too.
The liner for the Large (42 Bar Soap Mold) is made of Polyurethane. It fits on the bottom of the mold and then you pour you soap into the mold, put the dividers in and then when you unmold your soaps just peel the liner off the soaps and the soaps WILL NOT stick at all to the mold. Makes for a much easier way of unmolding the soaps. This liner is very strong and will last you a long time.
|
|
